linksysext

Linksys extender setup

Linksys Re6300 Extender Setup

The Linksys RE6300 extender is a great range extender that removes any dead zones. With the help of this WiFi extender, you can increase the reach of your network and take advantage of a fast internet connection. You only need to finish the Linksys RE6300 setup  before using the extender. You can get the most out of the extender when you have it configured properly. As a result, you need to know how to set up the Linksys RE6300 extender correctly . Once everything is configured, you can enjoy a fast internet connection everywhere.

Linksys Re6300 Extender Setup

Linksys Re6300 WiFi Extender Setup using manual method

Linksys Re6300 wifi Extender Setup using manual method
  • Connect the Linksys RE6300 AC1200 to a power outlet and wait for the power LED to turn solid.
  • On your device (computer or smartphone), go to your WiFi settings and connect to the default Linksys Extender network. 
  • Go to “extender.linksys.com” or linksys wifi extender setup in the address bar of a web browser after starting it.
  • When prompted, enter the default login credentials to access the extender setup page.
  • Follow the on-screen instructions to select and connect the extender to your existing WiFi network. Enter the WiFi password when prompted.
  • Once connected, wait for the extender to finish the setup process. The extender will confirm a successful connection, and you can then relocate it to a suitable location to enhance your WiFi coverage.

Note: If you need any assistance regarding your Linksys wifi Range extender, get in touch with us via the chat button you see on the bottom right corner of this page.

Setup Linksys RE6300 via WPS Method

  • Firstly, turn on the router and extender and keep them in the same room.
  • To turn on the WPS power, hit the router’s WPS button.
  • Press the WPS button on the extender within the next two minutes.
  • Allow the extender to connect to the router once some time has passed.
  • After a successful connection, the Linksys RE6300 WPS setup is completed.
  • Finally, move the connection and connect your devices to the network of the extender.
Setup Linksys RE6300 via WPS Method

How Do I Login Linksys RE6300 Wifi Range Extender?

  1. Switch on the extender first, then connect your device to it.
  2. You need an Ethernet cable in order to connect the computer to the extender.
  3. Now, from the device that is linked to the extender, open the web browser.
  4. The extender’s login page will then show on the screen.
  5. You must enter the default username and password in the proper sections in the login process.
  6. Finally, you can configure the extender after logging into its web interface.

Firmware update for linksys RE6300 extender

  • Firstly, you must use your login information to get into the extender’s web interface.
  • Click to Settings and then Firmware Upgrade from the user interface.
  • Here are the two ways you can use to upgrade the extender’s firmware.
  • Update the Linksys RE6300 Firmware
  • You have two options for updating the firmware: automatically or manually.
  • You must download and upload the firmware file in order to do a manual update.
  • In contrast, the other approach requires you to click Update Now in order to initiate the upgrade.
  • You will then need to wait while the extender starts updating its firmware.
  • Make careful not to interfere in any way with the firmware upgrading.
  • Finally, after the firmware upgrade is finished, you can use the extender.
Firmware update for linksys RE6300 extender

How To Reset Linksys RE6300 Extender?

How To Reset Linksys RE6300 Extender?
  1. Initially, find the extender’s reset button.
  2. It is found on the extender’s back.
  3. Press and hold the reset button now.
  4. Ten to twenty seconds later, you can turn off the button.
  5. Everything is returned to its factory default settings after the reset was done.
  6. In the final stage, you can assemble it from starting up.